CLASS MATERIAL LISTS

Please plan to have your supplies prior to the start of class.  Supplies can be purchased at SJ Jewelry Supply which is located next to the studio in Suite 1.  Give them a call at least 24 hours in advance and they will have the supplies put together and waiting for you.  Their phone number is:  602-956-0189

Beginning Jewelry Supplies     Cost is approximately $150

Weeks 1-3

6x6 sheet of 20g copper or brass

1 pack of 2/0 sawblades

2 1mm drill bits

1 sheet of 220 grit sandpaper

3 yellow bristle discs

3 red bristle discs

3 blue bristle discs

3 pink bristle discs

3 peach bristle discs

3 light green bristle discs

1 all in one polishing wheel - square edge

1 all in one polishing wheel - knife edge

7 mandrels for the bristle discs and all in one wheel

1 blue polishing drum and mandrel

1 foot of 20g round silver wire

1 stick for sanding (ruler or paint stick will work)

1 pair of flush cutters

RECOMMENDED:  Safety goggles/glasses

RECOMMENDED:  Dust mask

Weeks 4-5

3 feet of 16g round silver wire

1 coil of easy silver solder

1 coil of medium silver solder

1 coil of hard silver solder

1 spray bottle of Cupronil flux

1 6x6 solderite board

Weeks 6-8

1/2inx6in 20g silver sheet

6 inches silver flat wire (either size 2x1 or 3x1 - will be used for ring band)

1 inch silver disc 22g (24g or 20g are ok)

1 foot 3/16” silver bezel wire

1 round or oval cabochon approximately the size of a nickel or quarter

​

2 Day Intensive Beginning Jewelry Supplies     Cost is approximately $150

​

6x6 sheet of 20g copper or brass

1 pack of 2/0 sawblades

2 1mm drill bits

1 sheet of 220 grit sandpaper

3 yellow bristle discs

3 red bristle discs

3 blue bristle discs

3 pink bristle discs

3 peach bristle discs

3 green bristle discs

6 mandrels for the bristle discs

1 blue polishing drum and mandrel

1 stick for sanding (ruler or paint stick will work)

1 pair of flush cutters

Safety goggles/glasses

Dust mask

Cupronil Spray Flux

1 6x6 solderite board

1 coil of easy silver solder

1 coil of medium silver solder

1 coil of hard silver solder

1 foot 16g round silver wire

1/2inx6in 20g silver sheet

6 inches silver flat wire (either size 2x1 or 3x1 - will be used for ring band)

1 inch silver disc 22g (24g or 20g are ok)

1 foot 3/16” silver bezel wire

1 round or oval cabochon approximately the size of a nickel or quarter

All in one square edge polishing wheel

Intermediate Jewelry Supplies     Cost is approximately $150

​​

4.5 ft - 16g round silver wire

1 ft - 20g round silver wire

1 ft - 22g round silver wire

6 in - 16g silver rope OR bead wire

3 in - 8g silver double half round wire

1 piece - 1.5x3in 20g silver sheet

1 in - 5.5mm thick wall silver tube

1 in - 2mm silver tube

1 - silver flower or decorative element (no bigger than 10mm)

1 ft - 3/16 silver scallop OR serrated bezel wire

1 ft - silver chain Item #SSCHA04 (must be this chain)

6 in - 6g round copper OR silver wire

1 piece - 3x3in brass or copper sheet

1 - 5mm cubic zirconia

1 - 5mm setting bur

2 - 1.25mm drill bits

1 - 2mm drill bit

1 - tear drop shape cabochon approximately the size of a quarter

1 - round or roundish shape cabochon approximately the size of a dime

1 - rough stone or cabochon - any shape, quarter size or larger

1 - white pacific abrasive wheel - square edge AND mandrel

1- box of Moore's sanding discs (green and white box) - Medium grit and mandrel

​

If you don't have the following then also please purchase:

1 pack of 2/0 sawblades

2 1mm drill bills

1 sheet of 220 grit sandpaper

3 yellow bristle discs

3 red bristle discs

3 blue bristle discs

3 pink bristle discs

3 peach bristle discs

3 light green bristle discs

6 mandrels for the bristle discs

Easy, Medium and Hard Solder

1 6x6 solderite board

1 bottle of cupronil

Pink silicone disc with mandrel

1 blue polishing drum and mandrel

1 stick for sanding

1 pair of flush cutters

1 dust mask

​

2 Day Intensive Intermediate Jewelry Supplies     Cost is approximately $75 

​

3 ft - 16g round silver wire

1 ft - 20g round silver wire

1 ft - 22g round silver wire

6 in - 16g silver rope OR bead wire

3 in - 8g silver double half round wire

1 piece - 1.5x2in 20g silver sheet

1 in - 5.5mm thick wall silver tube

1 ft - 3/16 silver scallop OR serrated bezel wire

1 ft - silver chain Item #SSCHA04 (must be this chain)

6 in - 8g round brass OR silver wire

1 - 5mm cubic zirconia

1 - 5mm setting bur

1 - tear drop shape cabochon approximately the size of a quarter

1 - rough stone or cabochon - any shape, quarter size or larger

1 - white pacific abrasive wheel - square edge AND mandrel

1- box of Moore's sanding discs (green and white box) - Medium grit and 1 mandrel

If you don’t have the following then also please purchase:

1 pack of 2/0 sawblades

2 1mm drill bills

1 sheet of 220 grit sandpaper

3 yellow bristle discs

3 red bristle discs

3 blue bristle discs

3 pink bristle discs

3 peach bristle discs

3 light green bristle discs

6 mandrels for the bristle discs

Easy, Medium and Hard Solder

1 bottle of cupronil

1 6x6 solderite board

Pink silicone disc with mandrel

1 blue polishing drum and mandrel

1 stick for sanding

1 pair of flush cutters

​

Stone Setting Supplies     Cost is approximately $160 plus $65 to studio.

​

(The item numbers are the item numbers at SJ Jewelry Supply.  It is important you get the item listed and do not substitute items unless you talk to the instructor.). In addition to this list, there is a supply fee to the studio for the metal and stones of $65.

1.8 mm Bud Bur (Item# bur6018).                      Week 1

2.9mm Bud Bur (Item # bur6029)                       Week 2,3,5

1.5mm Bud Bur (Item# bur6015)                        Week 6,7

2.5mm Round Bur (Item# bur1025)                    Week 1

5.0mm Round Bur (Item# bur1050)                    Week 2

2.5mm Setting Bur (Item# bur413025)               Week 1

3.0mm Setting Bur (Item# bur413030)               Week 3

1.5mm Setting Bur (Item# bur413015)               Week 8,9,10

5.0 High Speed Setting Bur (Item# bur015)        Week 2    

1.3mm Hart Bur (Item# bur156C013)                  Week 8,9,10

1.5mm Hart Bur (Item# bur156C015)                  Week 8,9,10

2.0mm Hart Bur (Item# bur156C020)                  Week 6,7

1.4mm Inverted Cone Bur (Item# bur3014)         Week 3

Cup Bur  (Item# CC018)                                          Week 8,9,10

1.0mm drill bit     (Item# drl060)                           Week 1

1.25mm drill bit (Item# drl055)                             Week 1

Loop 10x                                                                  Weeks 1-10

Optivisor                                                                  Weeks 1-10

2 Steel center punch (Item# htl014)                     Week 1-10  (we will be making tools with these so please don’t plan to use one you already have and please get the exact one on this list)

Black square edge silicone wheel (Item# whl002)            Week 1-10

White square edge silicone wheel (Item# whl015)            Week 1-10

Blue square edge silicone wheel (Item# whl013)              Week 1-10

Blue mounted knife edge wheel (Item# pol202)                Week 1-10

Yellow, Red, Blue, Pink, Peach, Green Bristle Discs and Mandrels    Week 1-10

3 Mandrels (Item# man013)                                                                  Week  1-10

Brown mini polishing point (Item# pol051)                                         Week 1-10

Green mini polishing point (Item# pol051)                                          Week 1-10

2 Mandrels for polishing points (Item# man020)                               Week 1-10

Needle file handle Wooden (Item# file034)                                         Week 1

​